News

DPS (P&S) Verification Jig

DPS (P&S) Verification Jig

As an optional extra, Geovista can supply a DPS verification jig. This jig is used with the Downhole P & S probe. This jig can be attached to the receiver section of the DPS probes and two different signals can be generated. S Wave on Near receiver P Wave on Near...
Knuckle Joint

Knuckle Joint

Geovista supply a knuckle joint to add flexibility within the tool string. It is great for running centralized and eccentralized probes in the same stack. The knuckle joint is through wired and can be connected anywhere in a logging combination. It is especially useful in deviated hole and TBL memory logging mode applications....
Cable Wiper (air pressure)

Cable Wiper (air pressure)

Geovista supply cable wipers for your logging operations. Cleaning the cable from mud, water and debris as it is spooled out of a borehole is important to ensure the cable stays clean and lasts longer. This version uses an air pressure supply from the rig or air compressor (not included) Contact us for more...
Gamma Ray Verification Blanket

Gamma Ray Verification Blanket

Geovista now offers a GR verification blanket. This can be used with all gamma probes such as the natural gamma probe and the spectral gamma probe. It is useful to verify and check the gamma probe readings. We supply two different size blankets. One for 38mm probes and one for 60mm...
Shock Absorber

Shock Absorber

Geovista now offers a bottom of stack shock absorber. This is primarily used as running gear for the FOG Gyro for both real and memory mode operations but clients can choose to connect this on the bottom of some types of Geovista combinations. It is used to reduce any potential impacts of the tool when running in hole. The shock absorber is 34mm in diameter. Length is 27cm....